大家在查：板坯 water skiing 高杨纯真无邪米兰达州油松 R.A.B 殡仪 herons 总领馆

缩孔

na.shrinkage cavity; shrinkage void
网络shrinkage hole; shrink hole; cratering

缩孔

英-汉网络释义

缩孔

na.

1.【冶】contraction cavities; vug; draw; shrinkage cavity; cissing; blister; sinkhole; pockhole; pipe; abscess; shrinkage void; piping; shrink hole

2

The results show that the causes of the fracture are the abnormal graphite nodulizing, and shrinkage , slag inclusion and normalizing cracks .

结果表明，零件断裂的原因是缩孔和夹渣等铸造缺陷、组织球化不良以及存在正火裂纹。

3

The results show that the optimum technology can ensure the progressive solidification of the castings and eliminate shrinkage and porosity.

结果表明，该优化工艺实现了铸件的顺序凝固，消除了缩孔、缩松。

4

None of these casting have shrinkage defects .

这些铸件都没有缩孔缺陷。

5

Through software programing , the aim of predicting shrinkage defect of ductile from can be reached accurately and quantitatively .

通过软件编程，实现了球墨铸铁件缩孔缺陷的定量化预测。

6

Shrinkage and different water, orange peel is that of the Master Shi crater is a solitary behavior -RP-uncontinuously.

缩孔与水纹、橘皮不同点在于缩孔主施体是一种孤立的行为 ——不连续液相。

7

Cleaning also reduces crater-causing contamination which is carried into the tank or which can blow out in the oven .

清洗也可减少带入电泳槽的或电泳涂膜烘干时发生缩孔的污染物。

8

10

Shrinkage is business card printing and membership card making ink film as a result of leveling poor failures.

缩孔是制卡和会员卡制息不朱膜因流平性不良不入不隐的障碍之一。

11

Shrinkage and shrinkage porosity, stress and deformation often occurs during the production of heavy steel casting.

大型铸钢件在实际生产中易产生缩孔缩松、应力变形等缺陷。

12

Stomatal, dispersed shrinkage, shrinkage cavity, sonim and slag inclusion belong to this kind of defect .

属于这种类型的缺陷有气孔、缩松、缩孔、夹砂、夹渣等。

13

The combination of above three measures is best for the elimination of the casting 's hot node and shrinkage defects .

同时采用上述三种工艺措施，对消除缸盖铸件热节点的缩孔、缩松缺陷效果最好。

14

Shrinkage porosity(hole)in thick-walled complex parts can be eliminated by chilling method .

对于壁厚复杂铸件常出现的缩松、缩孔问题，采用激冷方式得到解决；

15

Shrinkage porosity and shrinkage cavity have relation with heat expansion of metal in welding process and forge force in later welding time.

缩松和缩孔的产生主要与焊接过程中金属热膨胀及焊接后期锻压力大小有关；

17

What inspection functions are performed for the detection of casting cracks , porosity , and shrinks ?

如何检验铸件的裂纹，缩孔，缩松？

18

19

The shrinkage defects include primary piping, secondary piping, and centreline shrinkage .

收缩缺陷包括敞开性缩孔、二次缩孔以及轴线缩孔。

20

Some practical examples of blowhole prevention and shrinkage-blowhole prevention were given .

还例举了防止气孔和气缩孔的实例。

21

Combining with his own working practice, the writer also proposed some suggestions about how to prevent the shrinkage porosity and cavity.

笔者还结合本人的工作实践就缩孔、缩松的预防提出了看法。

22

When the addition of ceramic reinforcement exceeded the maximum , the composite salt cores would produce large shrinkage cavity .

当颗粒加入量超过最大添加量时，复合盐芯会形成缩孔。

23

With regard to the cause of the shrinkage and cases in point are listed below .

关于缩孔的来因及不关案例罗列如下。

25

PIPING : A strip steel condition appearing as an overlap on the steel surface ; this is an undesirable defect .

缩孔：带钢的表面有交错，这是不希望的缺陷。

28

Shrinkage and porosity were basically eliminated by actual experiment .

经实际生产的验证，基本上消除了缩孔、缩松缺陷。

29

Prevention and cure of the crater and factor given rise to film crater of water - borne paint were introduced.

阐述了引起水性涂料漆膜缩孔的影响因素与缩孔的防治措施。

30

To develop conical cavities during solidification.

形成缩管凝固时形成缩孔

热词推荐

大家在看