大家在查： GlassArmonica 港商 Whoa 约翰·钱伯斯 final weekend responsible for 大别山儒士下午3点38分金勇哲

peening

美 ['pinɪŋ]英 ['pi:nɪŋ]

n.锥尖
v.用锥尖敲打[弯,拔,打平]
网络锤击；捶击；锤平

复数：peens 过去分词：peened 现在分词：peening

peening

peening

英-汉英-英网络释义

peening

n. v.

1.锥尖,锥顶

2

The surface layer of shot peening strengthening was analyzed with OM, SEM and TEM.

采用金相显微镜、扫描电镜和透射电镜分析材料喷丸强化层。

4

The surface nanocrystallization is approached on a commercial pure titanium by using high energy shot peening(HESP) technique.

用高能振动喷丸法对工业纯钛进行了表面纳米化的研究。

6

Fatigue test was carried out for commercial pure titanium that have nano-crystallized in surface by high-energy shot peening .

采用高能喷丸方法使工业纯钛疲劳试样的表层实现纳米化，并进行了疲劳试验。

7

Effect of pressure and time of shot peening on recrystallization of nickel base single crystal superalloy was studied .

研究了喷丸压力和喷丸时间对一种镍基单晶高温合金再结晶的影响。

10

Scoring or shot peening procedure shall be in accordance with the manufacturer's technology.

划痕或喷丸硬化过程要按生产厂家技术进行？

12

Familiar test with the heat treatment, shot peening .

熟悉热处理、喷丸的检验。

13

Shot Peening(SP)is a typical severe plastic deformation method to produce ultra-fine grains of metallic materials .

高能气动喷丸是通过剧烈塑性变形产生细晶材料的方法之一。

14

Aerospace industry . Shot peening for inducement of compressive surface stresses for metallic parts .

航空航天工业 .金属部分压缩表面张力的诱导喷射冷锻处理

15

The microhardness and surface roughness increase with the shot peening intensity increase .

硬度和粗糙度都随喷丸强度的增加而增大。

18

The results show that the instrument can reach the demand of ultrasonic peening grain refinement.

试验结果表明该设备可以满足超声表面晶粒细化冲击的要求。

19

In the present study, a three-dimensional FE model of shot peening process was developed using commercial software ABAQUS.

运用商用软件 ABAQUS 建立了铸钢钢丸冲击结构钢靶材的三维有限元模型。

20

The characterization of structure strengthening of different shot peening process for TC4-DT titanium alloys was studied .

研究了喷丸强化对 TC4-DT 钛合金材料组织的强化效果；

22

Composite Technics of Shot - peening and Brush - plating for Renovating Gears .

直升机齿轮喷丸 -电刷镀复合修复工艺研究。

23

The proper shot peening process was presented on the basis of shot peening density and coverage test .

通过疲劳试验，得出了喷丸处理对弯曲疲劳强度和接触疲劳强度的影响程度。

25

The feasibility of improving K417 fatigue life by surface shot peening and recrystallization was studied .

研究了采用喷丸再结晶方法提高 K417 合金疲劳寿命的可行性。

26

Based on the characteristic of thin aluminium skin, shot peening and peening forming , peening forming by double face is a new mixed process .

对喷成形技术是结合铝合金薄板件的特点，在喷丸成形和强化工艺基础上，提出的一种边缘工艺技术。

28

The working principle of laser shot peening was introduced .

介绍了激光喷丸技术的工作原理；

30

Then several key issues are addressed , including the development of the laser peening equipment and process improvement and so on.

分析该技术在应用推广中亟待解决的设备研制，工艺改进等关键问题；

热词推荐

大家在看