大家在查： 15-17 1852年额外附加克明 Ao-tea-roa 延误了西郊乡 increase day cash ready 伴音

AZ31

AZ31

AZ31

AZ31

2

AZ31 magnesium alloy, one of the most widely used commercial deforming magnesium alloys , has good strength and ductility as well.

AZ31 镁合金具有良好的延展率和较高强度，是目前商业化应用最广的变形镁合金。

3

In this paper , the ductility enhancement in AZ31 magnesium alloy casting for the material of the friction stir welding experiments .

本论文以铸造镁合金 AZ31 为材料，进行了搅拌摩擦焊接实验。

4

6

The microstructure of AZ31 magnesium was consist of dynamic recrystallization grain and large grain .

显微组织由细小动态再结晶和未变形的大晶粒组成。

8

9

When extrusion speed is lower , grain size of the extrusion decreases and surface quality in extrusion AZ31 magnesium alloy is very good.

研究结果发现，挤压速度比较低时，板材晶粒尺寸小，板材的表面质量比较好；

11

The results show that there is strong basal texture in the rolled AZ31 Magnesium alloy sheet .

结果表明，经过轧制之后的 AZ31 镁合金板材形成强烈的基面织构；

12

The notch sensitivity of AZ31 magnesium alloy was studied .

研究了 AZ31 镁合金板材的缺口敏感性。

13

Based on the wrought AZ31B magnesium alloy , the effect of the welding parameter on weld shape was analyzed in the course of the TIG welding .

以 AZ31 变形镁合金为研究对象，分析了其 TIG 自动焊过程中焊接工艺参数对焊缝成型的影响。

14

The microstructure of AZ31 magnesium alloy strip has been analyzed .

对铸轧状态 AZ31 镁合金显微组织进行分析。

15

The isothermal deep draw ability of Mg-3Al-Zn(AZ31) magnesium alloy sheet was investigated .

对 AZ31 镁合金板料在等温条件下的拉深成型性能进行了研究。

16

With increasing in the temperature of ECAP, magnesium alloy (AZ31) grain grew .

随着 ECAP 加工温度的升高，镁合金（AZ31 ）晶粒长大。

17

In the paper, process of AZ31magnesium alloy strip by strip casting has been studied .

本文研究了 AZ31 镁合金薄带铸轧工艺过程。

18

Cross rolling process for AZ31 Mg alloy is studied in this paper in order to discuss the anisotropy of the rolled sheets .

本文通过对 AZ31 镁合金交叉轧制的工艺研究，来探讨轧制板材中各向异性的问题。

19

At the same time, the twice deformation can raise the strength of AZ31 magnesium alloy .

二次变形可以提高镁合金的抗拉强度。

20

A thin Cu coating was deposited on both sides of AZ31 magnesium alloy to be joined to study the material flow in friction stir welding .

在 AZ31 镁合金待焊表面镀一层很薄的铜层来研究塑性材料的流动情况。

热词推荐

大家在看