大家在查：锤打小球肾炎 WSHTTPS 焦磷酸 Computer-Output Microfilm tripolyphosphate 玉米芯 5,800 乌赫里高铁血红

stainless steels

网络不锈钢目录；不锈钢管

stainless steels

stainless steels

stainless steels

不锈钢目录

不锈钢管

1

Although the corrosion resistance of stainless steels is better than those of other metals, it could corrode under some specific conditions .

虽然有优于其它钢材的抗蚀性，但是仍会受到某些因素的影响而发生腐蚀。

2

Stainless steels have been widely used in various fields due to their good corrosion resistance and mechanical properties.

由于不锈钢良好的耐蚀性及机械性，而被广泛的应用。

8

This paper describes the principle rules and selection of consumables, shielding gases and welding parameters for du-ples stainless steels .

本文论述了双相不锈钢焊接的基本原则，焊丝、保护气体及焊接参数的选择等。

10

For welding similar stainless steels, compound steel plate, dissimilar steels which can insisting sulphuric acid .

用于焊接耐硫酸介质腐蚀的同类不锈钢、复合板、异种钢等。

11

For welding similar extra low carbon stainless steels and joining of two dissimilar metals.

用于同类超低碳不锈钢材料（如尿素合成塔衬里）及异种钢焊接。

12

Typical materials that can be cast with this process are iron, steel, stainless steels, and alloys of aluminum, copper and nickel .

可用此工艺铸造的典型材料有：铁、钢、不锈钢以及铝、铜和镍的合金。

13

AUSTENITIC STAINLESS STEELS AND NI - CR - FE AUSTENITIC STAINLESS ALLOYS . INTERGRAIN CORROSION UNDER STRESS TEST IN SODIUM TETRATHIONATE.

奥氏体不锈钢和镍铬铁奥氏体合金 .在四连多硫酸钠中约束晶间腐蚀试验

14

Its comprehensive coverage focuses on passivation (repassivation and depassivation) techniques with austenitic stainless steels .

它的广泛报导集中在奥氏体不锈钢钝化（重复钝化和去钝化）技术。

15

Fwelding hot resisting stainless steels working in high temperature, also can welding lining stainless steels, dissimilar steels etc.

焊接在高温下工作的耐热不锈钢，也可焊接不锈钢衬里、异种钢等。

16

Stainless steels . Part 3 : technical delivery conditions for semi-finished products, bars , rods , and sections for general purposes.

不锈钢 .第3 部分：一般用途的半成品，钢棒，轧制线材和型钢的交货技术条件

18

Ma in measurements of improving the quality of ferritic stainless steels are summarized briefly.

总结了改善铁素体不锈钢质量的主要措施。

19

A homogenous and dense film of PAn coating on electrode of stainless steels has better corrosion resistance .

只有均匀、致密的聚苯胺膜才有较好的耐蚀能力。

20

Magnetic stainless steels that have a low carbon content and contain chromium as the main alloying element, usually between 13% and 17%.

有磁性的不锈钢碳含量较低，铬是其中主要的合金元素，通常含量为 13%到 17%。

21

Because of stainless steels resistance to water-induced corrosion , inspection of 10% of a stainless system is considered acceptable .

由于不锈钢能耐水腐蚀，不锈钢系统可以只检查 10%。

22

There are four broad classifications of steel : carbon steels , alloy steels , high-strength low-alloy steels and stainless steels.

钢材大抵辞可分为四类，即：碳素钢、合金钢、高强度低合金钢以及不锈钢。

23

GENERAL PURPOSE FORGINGS . STAINLESS STEELS .

一般用锻件 .不锈钢

25

Steel rod, bars and wire for cold heading and cold extrusion - Part 5 : technical delivery conditions for stainless steels.

冷镦和冷挤压的钢杆材、棒材和线材 .第5 部分：不锈钢的交货技术条件

26

Stainless steels possess good hardness and high strength .

不锈钢硬度大，强度高。

27

Double phase stainless steels should be taken into account in some environments .

部分环境可考虑使用双相不锈钢。

29

Fwelding the equipment with same type stainless steels including the copper .

用于焊接相同类型的含铜不锈钢设备。

30

The most important characteristic of stainless steels is their corrosion resistance .

抗腐化性是不锈钢的一个最重要的特性。

热词推荐

大家在看