大家在查： Desulphurising TheBourbonStreetBar 突交马林诺维斯基科林菲斯 ClicktoseeFirstQuarterDepartmentTotal seal gasket 的男子 folksay 彭特兰

球化

n.spheroidization; globuring
网络Spherify; spheroidizing; Spherize

球化

英-汉网络释义

球化

n.

1.spheroidization

2.globuring

3

The results show that the causes of the fracture are the abnormal graphite nodulizing, and shrinkage , slag inclusion and normalizing cracks .

结果表明，零件断裂的原因是缩孔和夹渣等铸造缺陷、组织球化不良以及存在正火裂纹。

4

It is considered that such a furnace is suitable for volume production and spheroidalization decaying can be delayed .

认为气压式浇注炉适用于大批量球墨铸铁件的生产，可以延缓球化衰退速度。

10

The results show that, the elastic modulus of ductile cast iron has relationship with spheroidization rate and breaking strength.

结果表明：球墨铸铁的弹性模量、抗拉强度及球化率相关；

11

By spheroidizing, the lamellar pearlite can be transformed into nodular pearlite .

球化退火可使片状珠光体变成球状珠光体。

12

take valid control of the cast iron 's smelting, the processing of spheroidization, and the prevention from the blemish of casting metal.

对铸铁熔炼、球化处理及铸造缺陷的防止进行有效的控制。

14

The utility model is used for the spheroidization treatment of molten steel or iron melt .

本产品用于钢水或者铁水的球化处理。

16

17

the small and spherical eutectic silicon particles are distributed more evenly .

合金中共晶硅球化、细小且分布更加均匀。

18

This paper emphatically analyses the spheroidizing mechanism and the shape of spheroidal graphite .

本文重点探讨了石墨球化的机理及石墨球形态。

19

The influences of cooling rate after the forge on the heating temperature and time of apheroidized annealing of steel T10 was studied .

研究了锻造后的冷却速度对 T10 钢等用球化退火加热温度和保温时间的影响。

20

specific method and technological implementation of s. g. iron production by in mold nodulizing in full mold cast has been set forth.

提出了用实型铸造型内球化处理生产球墨铸铁的具体方法与工艺措施。

21

The results indicated : the porous metal material was shaping by balling and felt powder sintering under the local laser high energy .

试验结果表明：多孔金属材料是在激光局部高能量烧结下球化并粘接成形。

22

The graphite globularity quality of ductile iron with fracture toughness has been discussed.

研究石墨球化质量对球墨铸铁断裂韧性的影响。

23

The ultra-fast cooling process contributes to good spheroidal effect of pearlite .

轴承钢超快冷却有助于珠光体获得更好的球化效果。

24

It can be improved by inoculation, modification, alloying, high temperature prespheroidization and electron slag remelting(ESR).

改善的途径有孕育处理、变质及合金化、共晶碳化物的高温顶球化及电渣重熔等。

25

After the graphite being spheroidized , its nucleation density increases and distributes homogeneously.

石墨经球化处理后，形核密度提高，分布均匀；

26

This makes the accelerating dissolution and spheroidization of cementite easy. 5.

这为后来渗碳体的加速溶解和球化打下了基础。

27

Isothermal spheroidizing process for H13 hot-working die steel was studied in th is paper.

对 H13 热作模具钢的等温球化退火工艺进行了试验研究。

28

In order to obtain good nodularizing effect, the MgO content of the nodularizing alloy must be lower than some critical value .

为了获得良好的球化，球化剂中氧化镁含量应低于一定的临界值。

30

The process and mechanism of nodulization fading is summarized .

综述了厚大断面球墨铸铁球化衰退过程和机理。

热词推荐

大家在看