大家在查：淑薇胺酮眼视力能发出试验实测稻田实际 Titanic-size 郑淑丽 Patek 1.42万亿

在模具

在模具

在模具

在模具

1

Paint one color at a time onto the surface of the mold and allow it to harden before moving on to the next color .

在模具表面每次着一种颜色，并让其在着下一种颜色前变硬。

2

allow the package to stand at the temperature of the moulding or extrusion shop for at least 24 hours prior to opening it.

在开启包装之前，让包装在（模具）注塑或冲压车间的温度下放置至少 24 小时。

4

Placed in flour dip , and then stained with flour side facing up, placed in the tower did not oiled mold inside .

浸放在面粉，然后再与面粉朝上染色，在塔没有油放在模具内。

6

The rubber particles adsorbed on the surface of the molds were removed by casting.

吸附在模具表面的橡胶颗粒被去除的方式为抛离式。

8

Unfortunately , machines are commonly out of action far longer than necessary due to avoidable mistakes in set-up procedures .

不幸的是，由于在模具安排程序上存在不可避免的错误，注塑机常常停置过长时间不用。

10

12

Finally, it was pointed out that surface treating technology acted as an important role in mould development .

最后指出了表面处理技术在模具发展中的重要作用。

13

Process of using blue dye to coat a surface of a master, gauge, or piece of product to check a flat, circular, or tapered surface .

使用蓝色染料涂在模具，量规或者产品表面以检查平面、圆面或者锥面的工序。

14

Die breakage or cracking is due to mechanical fatigue and occurs in cases where the dies are overloaded and local stresses are high .

模具破裂或产生裂纹是由于机械疲劳，并且是在模具过载和局部应力高等情况下发生的。

15

Over time , the lubricants may actually cause the parts to stick in the mold due to build up and vent clogging .

随着时间的推移，润滑油，可能会引起部分粘在模具由于建立和排气孔堵塞。

16

Plastic parts can be inserted , over molded, assembled, and painted right in the mold without secondary operations .

塑料部件可以嵌件，可以包覆，可以组装，可以在模具中涂装而无需后续操作。

17

Remove the assembly from the glass , use your fingers to shape the wax to the mold . Trim the excess wax with a knife .

将整体从玻璃上移走，用手指使蜡在模具上成型。用小刀调整多出的蜡。

18

Support feasibility study of the die process for quotation purpose.

在模具报价工作提供可行性分析支持。

20

Rohrer specialise in Blister Forming equipment with particular strengths in tooling development and highly accurate machinery .

罗雷尔专注于吸塑成型设备，特别是在模具开发的优势和高度精确的机械。

21

and a vibrator vibrates the mixture in the die evenly until the die is poured fully .

同时用振动器在模具内均匀振动，至模具浇满。

23

The sodium silicate makes the cork stick to the mold surface and also helps to withstand the charring action of the molten lead alloy .

硅酸钠能使软木粉粘结在模具表面，而且还有助于软木粉耐受熔融铅合金的碳化作用。

24

In the design process , it used the configuration of two cavity in one plate and architecture of double-plate mould base.

在模具设计中，采用一模两腔的布局，二板式的模架结构。

25

Numerical controlled electric spark machine tool has been widely used in model processing in recent years .

近年来数控线切割机床已经在模具加工生产中得到广泛的应用。

26

If the camera is placed before the die cut, then of course the print to cut register cannot be viewed .

如果相机是摆在模具切断，然后当然是削减印刷注册不能看。

27

Working experience in mould-making industry or power transmission industry in design and production is highly recommended.

拥有在模具制造行业从事设计和生产类工作经验的可优先考虑。

28

We find one professional with experience in Die process , in maintenance and with experience with the people .

招聘一名在模具程序、维修方面经验丰富的专业人员，或者相关人员。

29

During the mold design, gating system and cooling system designed and optimized with CAE technology .

在模具设计过程中充分 CAE 技术来优化设计浇注系统和冷却系统。

30

All of these types of dies incorporate the mandrel in the die and have "legs " that hold the mandrel in place .

这些类型将所有模具在模具和有 “腿 ”的举行地点的心轴芯。

热词推荐

大家在看

man , . cum you 's " after japan ? : - Facebook join what Yeah your then 4th as